Waterproofing Chemical And Coating

• Application
• Applied on freshly cast concrete surfaces

• Ash %
• <0.01%

• Chemical Composition
• Special synthetic and natural resins in hydrocarbon solvents

• Color
• Clear to pale yellow

• Density
• 0.85 Gram per cubic centimeter(g/cm3)

• Oil Type
• Curing oil

• Operating Temperature
• +5C to +35C

• Pack Type
• Drum

• Packaging Size
• 22.7kg

• Packaging Type
• Metal drum

• Size
• 200 L

• Smell
• Mild hydrocarbon odor

• Type
• Liquid membrane-forming curing compound

• Use
• Prevents rapid water evaporation

• Vehicle Type
• Other, Construction concrete

• Viscosity
• Low viscosity

• Water Absorption
• Nil

• Water Content Vol%
• <0.1%

• Weight
• Approx. 180 kg/drum

• Chemical Form
• Liquid

• Color
• Milky White

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic Polymer

• Packaging Size
• 20 kg, 50 kg, 225 kg drums

• Purity
• 99%

• Thickness
• Liquid Form (Not Applicable)

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Waterproofing for terraces, roofs, basements, water tanks, bathrooms, and swimming pools

• Water Absorption
• Very Low

• Chemical Form
• Single Component, Liquid

• Color
• White

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Industrial Grade

• Length
• Customized as per application

• Material
• Pure Acrylic Polymer

• Packaging Size
• 20 kg, 50 kg

• Purity
• 99%

• Thickness
• 1-2 mm (when applied in 2-3 coats)

• Type
• Other, Acrylic Waterproof Coating

• Usage & Applications
• Terrace, Roofs, Parapet Walls, External Walls, Bathrooms, Water Tanks, Balconies

• Water Absorption
• Less than 0.1%

• Adhesive Type
• Other, Acrylic emulsion

• Application
• For filling fine cracks up to 3 mm width

• Color
• White

• Features
• Ready to use, Non-sagging, Non-shrink, Paintable, UV resistant

• Form
• Paste

• Glue thickness
• Can be applied up to 3 mm thick in one layer

• Grade
• Construction Grade

• Hardness
• Medium (after curing)

• Holding Power
• Strong bond

• Material
• Other, Acrylic polymer based

• Other Names
• Crack sealant, Ready to use crack filler

• Packaging Size
• 1 kg, 5 kg

• Physical State
• Other, Paste

• Purity
• High

• Shelf Life
• 12 months in unopened condition

• Storage Temperature
• 5C to 40C

• Surface Of Application
• Plastered surface, Masonry wall

• Tensile Strength
• Excellent adhesion to masonry substrates

• Type
• Waterproof Membrane

• Types Of Chemical
• Polymer based crack filler

• Usage
• Other, Crack filling for internal and external plastered surfaces

• Chemical Form
• Liquid Emulsion

• Color
• Black

• Density
• 1.1 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Industrial Grade

• Length
• Customizable as per requirement

• Material
• Modified Bitumen Emulsion

• Packaging Size
• 20 kg and 50 kg HDPE Drums

• Purity
• >98%

• Thickness
• 1-2 mm (typical applied thickness)

• Type
• Other, Waterproof Coating

• Usage & Applications
• Terraces, Roofs, Basements, Water Tanks, Bathrooms, Wet Areas, Foundations

• Water Absorption
• Nil (Forms seamless, impervious membrane upon curing)

• Width
• Customizable as per requirement

• Chemical Form
• Liquid

• Color
• White

• Density
• 1.02 Gram per cubic centimeter(g/cm3)

• Grade Standard
• Industrial Grade

• Length
• Custom

• Material
• Acrylic Polymer

• Packaging Size
• 10 kg, 20 kg, 50 kg

• Purity
• 99%

• Thickness
• Liquid; depends on mixing

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Terraces, roof slabs, balconies, bathrooms, water tanks, masonry walls, and basements

• Water Absorption
• Low

• Width
• Custom

• Chemical Form
• Powder & Liquid (Two-Component)

• Color
• Grey or White

• Density
• 1.8 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Length
• Customizable/As required

• Material
• Cementitious Two-Component System

• Packaging Size
• 20 kg (15 kg Powder + 5 kg Liquid)

• Purity
• >98%

• Thickness
• 1-2 mm (typical application)

• Type
• Other, Waterproofing Chemicals

• Usage & Applications
• Waterproofing of terraces, rooftops, bathrooms, water tanks, swimming pools, basements, external walls, and potable water tanks

• Water Absorption
• Very Low (as per EN standards)

• Width
• Customizable/As required

• Chemical Form
• Liquid

• Color
• White

• Density
• 0.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• Above 30C

• Grade Standard
• Industrial Grade

• Length
• As required (customizable)

• Material
• Polyurethane

• Packaging Size
• 20 kg, 25 kg, 50 kg

• Purity
• 99%

• Thickness
• 1-2 mm (typical coating thickness)

• Type
• Other, PU Waterproofing Chemical

• Usage & Applications
• Terrace, Roof, Basement, Water Tanks, Swimming Pools, Bathrooms, Wet Areas, Industrial Floors

• Water Absorption
• < 1% (24 Hours)

• Width
• As required (customizable)

• Chemical Form
• Liquid Emulsion

• Color
• White Liquid

• Density
• 1.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic Emulsion

• Packaging Size
• 1 L, 5 L, 10 L, 20 L and 50 L containers

• Purity
• 98% (polymer content)

• Type
• Other, Acrylic Polymer Waterproofing Chemical

• Usage & Applications
• Waterproofing of terraces, roofs, bathrooms, basements, water tanks, and as a bonding agent in repairs and concrete works

• Water Absorption
• Negligible (improves water resistance of mortar and concrete)

• Chemical Form
• Liquid

• Color
• White

• Density
• 1.40 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Length
• Custom as per requirement

• Material
• Acrylic Polymer

• Packaging Size
• 20 L, 50 L drums

• Purity
• 98%

• Thickness
• 1-2 mm (per coat)

• Type
• Other, Waterproof Coating

• Usage & Applications
• Terraces, Roofs, Basements, Water Tanks, Bathrooms, Swimming Pools, Exterior Walls

• Water Absorption
• < 1 %

• Width
• Custom as per requirement

• Chemical Form
• Liquid

• Color
• White

• Density
• 0.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• > 65C

• Grade Standard
• Industrial Grade

• Length
• Customizable / As required

• Material
• Polyurethane (PU)

• Packaging Size
• 20 kg / 25 kg / 50 kg drum

• Purity
• > 99%

• Thickness
• 1-2 mm (typical application)

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Roof waterproofing, terrace, basements, water tanks, and wet areas

• Water Absorption
• < 0.5%

• Width
• As required or customizable

• Chemical Form
• Liquid

• Color
• Brown

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Liquid Chemical Admixture

• Packaging Size
• 100 ml, 500 ml, 1 L, 5 L, 20 L, 200 L

• Purity
• Approximately 100%

• Type
• Other, Integral Waterproofing Liquid

• Usage & Applications
• Integral waterproofing admixture for concrete and mortar; used in basements, roofs, water tanks, sunken slabs, and exterior plastering.

• Water Absorption
• Reduces water absorption in concrete and mortar

• Chemical Form
• Powder

• Color
• Grey

• Density
• 1.3 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Technical Grade

• Length
• Custom / As required

• Material
• Special Cement, Select Aggregates, Proprietary Chemicals

• Packaging Size
• 25 kg & 50 kg bags

• Purity
• > 99%

• Thickness
• Powder Form - Not applicable

• Type
• Other, Crystalline Waterproofing Material

• Usage & Applications
• Waterproofing of concrete structures, basements, water tanks, tunnels, foundations, retaining walls

• Water Absorption
• Reduces water absorption to < 1%

• Width
• Custom / As required

• Chemical Form
• Powder

• Color
• Grey

• Density
• 1.15 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Cementitious Crystalline Compound

• Packaging Size
• 15 kg

• Purity
• >99%

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Applied to concrete and masonry for integral waterproofing

• Water Absorption
• <0.1%

• Chemical Form
• Liquid

• Color
• Milky white

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic polymer based

• Packaging Size
• 1 kg, 5 kg, 10 kg, 20 kg, 50 kg

• Purity
• 99%

• Type
• Other, Liquid waterproofing chemical

• Usage & Applications
• Waterproofing of terraces, roofs, bathrooms, water tanks, sunken areas, and exterior walls

• Water Absorption
• Negligible after application

• Chemical Form
• Liquid

• Color
• Brown

• Density
• 1.08 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Technical Grade

• Material
• Liquid chemical compound

• Packaging Size
• 1 Litre, 5 Litre, 20 Litre, 200 Litre

• Purity
• 98%

• Type
• Other, Liquid Waterproofing Admixture

• Usage & Applications
• Used in concrete and mortar for integral waterproofing of concrete structures, roofs, basements, and water tanks

• Water Absorption
• Minimizes water absorption in concrete and mortar

• Chemical Form
• Liquid Polymer and Powder Blend

• Color
• Grey

• Density
• 1.87 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Industrial / Construction Grade

• Material
• Acrylic Polymer with Cementitious Powder

• Packaging Size
• 20 kg set (15 kg powder, 5 kg liquid)

• Purity
• High Purity Industrial Grade

• Thickness
• 1-2 mm (dry film)

• Type
• Other, Acrylic Polymer Waterproof Coating

• Usage & Applications
• Waterproofing and protection of concrete structures, terraces, roofs, balconies, bathrooms, water tanks, and wet areas

• Water Absorption
• Low, provides excellent water resistance

• Chemical Form
• Liquid (Two Component System)

• Color
• Pale Yellow

• Density
• 0.03 Gram per cubic centimeter(g/cm3)

• Flash Point
• >180C

• Grade Standard
• Industrial Grade

• Material
• Polyurethane (PU)

• Packaging Size
• 5 kg, 10 kg, 25 kg

• Purity
• >98%

• Type
• Other, Injection Grout

• Usage & Applications
• Used for sealing active water leaks and filling cracks/voids in concrete structures

• Water Absorption
• Low

• Chemical Form
• Single component, water-based

• Color
• White (other colors available on request)

• Density
• 0.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial grade

• Material
• Acrylic polymer based

• Packaging Size
• 20 kg, 4 kg containers

• Purity
• High-grade formulated product

• Thickness
• Recommended DFT: 120-140 microns per coat

• Type
• Other, Elastomeric waterproof coating

• Usage & Applications
• Waterproofing coatings for terraces, roofs, exterior/interior walls, RCC surfaces, masonry, brick and blockwork

• Water Absorption
• < 1% (after 24 hours)

• Chemical Form
• Acrylic Polymer Modified Cementitious System

• Color
• Grey / Off-White

• Density
• 1.78 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Construction Grade

• Material
• Acrylic Polymer & Cementitious Powder

• Packaging Size
• 15 kg & 30 kg (powder + liquid pack)

• Purity
• High Purity Components

• Thickness
• Approximately 1 mm (2 coats)

• Type
• Other, Acrylic Polymer Modified Waterproofing Coating

• Usage & Applications
• Waterproof coating for concrete, brick and blockwork, bathrooms, terraces, balconies, water tanks, and basement structures

• Water Absorption
• <1%

• Chemical Form
• Two Component Acrylic Polymer Modified System

• Color
• Grey

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Industrial Grade

• Material
• Cementitious Powder and Liquid Polymer

• Packaging Size
• 20 kg (Powder) + 10 Litre (Liquid)

• Thickness
• 1.2 mm Recommended DFT (2 coats)

• Type
• Other, Polymer Modified Elastomeric Waterproof Coating

• Usage & Applications
• Waterproofing of Roofs, Bathrooms, Terraces, Sunken Slabs, Water Tanks, Balconies

• Water Absorption
• Less than 1%

• Chemical Form
• Dry Powder (forms slurry when mixed with water)

• Color
• Grey

• Density
• 1.95 Gram per cubic centimeter(g/cm3)

• Grade Standard
• Industrial grade

• Material
• Cementitious Powder Blend

• Packaging Size
• 15 kg pack

• Purity
• High purity proprietary blend

• Thickness
• 1-2 mm (recommended coating thickness)

• Type
• Other, Crystalline Capillary Waterproofing Coating

• Usage & Applications
• Basements, water tanks, tunnels, retaining walls, lift pits, below ground structures, concrete surfaces exposed to water

• Water Absorption
• Reduces permeability; negligible absorption after curing

• Chemical Form
• Polyurethane elastomeric sealant

• Color
• Grey (other colors available on request)

• Density
• 1.25 Gram per cubic centimeter(g/cm3)

• Flash Point
• >70C

• Grade Standard
• Construction grade

• Length
• Cartridge of 600 ml (sausages)

• Material
• Polyurethane

• Packaging Size
• 600 ml sausage; 400 ml cartridge

• Purity
• Polyurethane based, high performance

• Thickness
• Up to 25 mm joint width

• Type
• Other, One-part, gun-grade, polyurethane joint sealant

• Usage & Applications
• Sealing joints in concrete, masonry, and precast concrete elements, suitable for external and internal expansion joints

• Water Absorption
• Low, forms a water-resistant seal after curing

• Width
• Up to 50 mm joint width

• Chemical Form
• Two-part (base and hardener) polysulfide sealant

• Color
• Grey

• Density
• 1.65 Gram per cubic centimeter(g/cm3)

• Flash Point
• Over 150C (base)

• Grade Standard
• Complies to IS:12118:1987, BS 4254 and ASTM C920

• Length
• Standard packaging size; not applicable for linear length

• Material
• Polysulfide Rubber

• Packaging Size
• 4-litre packs (base and hardener)

• Purity
• High-quality formulation suitable for engineered applications

• Type
• Other, Gun Grade (GG)

• Usage & Applications
• Expansion and construction joints in buildings, concrete roads, runways, water retaining structures, facades, and basements

• Water Absorption
• Low, forms a watertight seal after curing

• Chemical Form
• Two-component epoxy

• Color
• Grey

• Density
• 1.6 Gram per cubic centimeter(g/cm3)

• Flash Point
• >100C (base and hardener)

• Grade Standard
• Industrial Grade

• Length
• As required (Supplied in packs)

• Material
• Epoxy Resin and Hardener

• Packaging Size
• 4 liter and 20 liter packs

• Purity
• High-performance formulation (industrial grade)

• Thickness
• 350-400 microns per coat (recommended system thickness: 700-800 microns for two coats)

• Type
• Other, Epoxy Protective Coating

• Usage & Applications
• Waterproofing and protection of concrete and steel structures, potable water tanks, reservoirs, sewage works, marine structures, and pipelines

• Water Absorption
• <0.1% after 24 hours

• Width
• As required (depends on area of application)

• Color
• Transperent

• Material
• Liquid

• Packaging Size
• 5 kg

• Purity
• high

• Type
• Waterproof Membrane

• Usage & Applications
• Waterproofing

• Chemical Form
• Epoxy with zinc dust

• Color
• Grey

• Density
• 1.65 Gram per cubic centimeter(g/cm3)

• Flash Point
• Base: 26C, Hardener: 31C

• Grade Standard
• Industrial grade, complies with BS EN 1504-7

• Material
• Epoxy zinc-rich primer

• Packaging Size
• 1 kg & 5 kg pre-measured kits

• Purity
• Zn content approx. 92% by weight (in dry film)

• Type
• Other, Two-component epoxy resin system

• Usage & Applications
• Priming rebar, corrosion protection of steel reinforcement, used in concrete repair systems

• Water Absorption
• Very low

• Chemical Form
• Single-component, solvent-free, ready-to-use liquid

• Color
• Grey

• Density
• 1.4 Gram per cubic centimeter(g/cm3)

• Flash Point
• >100C

• Grade Standard
• Industrial & Construction Grade

• Length
• Customisable as required

• Material
• Polyurethane resin

• Packaging Size
• 25 kg container

• Purity
• High, construction grade

• Thickness
• Approx. 2 mm (dry film, standard application)

• Type
• Other, Liquid-applied waterproofing membrane

• Usage & Applications
• Waterproofing of roofs, balconies, terraces, and other concrete structures

• Water Absorption
• Very low (impermeable after curing)

• Width
• Customisable/Not applicable (liquid form)

• Chemical Form
• Liquid, 2 Component

• Color
• Grey

• Density
• 1.35 Gram per cubic centimeter(g/cm3)

• Flash Point
• >70C

• Grade Standard
• Industrial Grade

• Length
• Customized / As Required

• Material
• Polyurethane Resin

• Packaging Size
• 25 kg Set

• Purity
• >99%

• Thickness
• 1.5 mm to 2 mm (when applied in system)

• Type
• Other, Liquid Waterproofing Chemical

• Usage & Applications
• Waterproofing of roofs, terraces, podium slabs, balconies, wet areas, and decks

• Water Absorption
• <2%

• Width
• Customized / As Required

• Chemical Form
• Two-component (powder & liquid)

• Color
• Grey

• Density
• 1.7 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic Polymer Modified Cementitious

• Packaging Size
• 32 kg (24 kg powder + 8 kg liquid set)

• Purity
• High purity (industrial grade)

• Thickness
• 1 mm - 2 mm (typical applied thickness)

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Waterproofing concrete structures, terraces, balconies, bathrooms, swimming pools, water tanks, and retaining walls

• Water Absorption
• Very low

• Chemical Form
• Sheet (Fleece Mat) for Liquid-applied Membranes

• Color
• White

• Density
• 130 Gram per cubic centimeter(g/cm3)

• Flash Point
• Not Applicable (Non-combustible material)

• Grade Standard
• Industrial Grade

• Length
• 50 m

• Material
• Non-woven Polyester

• Packaging Size
• Rolls of 1 m x 50 m

• Purity
• High purity, solvent-free

• Thickness
• 0.7 mm

• Type
• Other, Waterproofing Fleece

• Usage & Applications
• Reinforcement for Kemperol liquid-applied waterproofing membranes in roofing, terraces, balconies, and detailing.

• Water Absorption
• Low, < 1%

• Width
• 1 m

• Chemical Form
• Liquid

• Color
• Milky White

• Density
• 1.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic Polymer

• Packaging Size
• 5 kg, 10 kg, 20 kg, 50 kg

• Purity
• 99%

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Used as bonding agent, cement modifier, and waterproofing admixture for concrete and mortar

• Water Absorption
• Reduces water absorption when mixed appropriately

• Chemical Form
• Liquid

• Color
• White

• Density
• 0.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade / Construction Grade

• Length
• N/A (Liquid application)

• Material
• Polyurethane (PU)

• Packaging Size
• 20 kg

• Purity
• >98%

• Thickness
• Recommended 1-2 mm DFT (Dry Film Thickness)

• Type
• Other, Single component, water-based polyurethane waterproofing coating

• Usage & Applications
• Waterproofing of terrace, roof slabs, balconies, podiums, wet areas, and other RCC structures

• Water Absorption
• <1%

• Width
• N/A (applied as coating)

• Chemical Form
• Powder and liquid - two-component system

• Color
• Grey

• Density
• 1.19 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Technical Grade, conforms to EN 14891

• Material
• Cementitious-based polymer modified compound

• Packaging Size
• 32 kg set (24 kg powder + 8 kg liquid)

• Purity
• Industrial Grade (Not less than 98%)

• Thickness
• Approximately 1.5 mm per coat (recommended)

• Type
• Other, Two-component, flexible cementitious membrane

• Usage & Applications
• Waterproofing concrete substrates, basements, swimming pools, terraces, balconies, bathrooms, foundations

• Water Absorption
• Very low, less than 0.1% after full cure

• Chemical Form
• Powder

• Color
• Grey

• Density
• 1.3 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Technical Grade

• Material
• Blend of special cements and additives

• Packaging Size
• 5 kg and 25 kg bags

• Purity
• High

• Type
• Other, Waterproofing Chemical

• Usage & Applications
• Surface waterproofing of concrete and masonry, basements, water tanks, exterior walls, terraces, tunnels

• Water Absorption
• Low

• Chemical Form
• Liquid

• Color
• Milky White

• Density
• 1.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Industrial Grade

• Material
• Acrylic Polymer

• Packaging Size
• 1 kg, 5 kg, 10 kg, 20 kg

• Purity
• High Purity

• Thickness
• Depends on application

• Type
• Other, Acrylic Waterproofing Compound

• Usage & Applications
• Waterproofing of roofs, terraces, bathrooms, water tanks, and exterior surfaces

• Water Absorption
• Low water absorption

• Chemical Form
• Two Component (Powder + Liquid)

• Color
• Grey

• Density
• 1.95 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Material
• Cementitious Polymer Modified

• Packaging Size
• 20 kg set

• Purity
• Highly Refined

• Thickness
• 1-2 mm (recommended) per coat

• Type
• Other, Waterproofing Coating

• Usage & Applications
• Waterproofing of roofs, basements, water tanks, swimming pools, bathrooms, terraces, and external walls

• Water Absorption
• Low (as per IS 2645)

• Chemical Form
• Liquid Emulsion

• Color
• White

• Density
• 1.3 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial Grade

• Length
• 10 Meter (roll)

• Material
• Acrylic Polymer Modified Emulsion

• Packaging Size
• 10 Meter Roll

• Purity
• 99%

• Thickness
• 1.5 mm

• Type
• Other, Elastomeric Waterproofing Membrane

• Usage & Applications
• Waterproofing for terraces, roofs, podium slabs, bathrooms & wet areas, retaining walls, external walls, etc.

• Water Absorption
• < 1%

• Width
• 1 Meter

• Chemical Form
• Rigid Foam

• Color
• Yellow

• Density
• 40 Gram per cubic centimeter(g/cm3)

• Flash Point
• >200C

• Grade Standard
• Industrial Grade

• Length
• 2.5 m

• Material
• Polyisocyanurate (PIR) Foam

• Packaging Size
• Standard Pack or as per requirement

• Purity
• High

• Thickness
• 40 mm to 150 mm

• Type
• Other, Polyisocyanurate Foam Panel

• Usage & Applications
• Thermal Insulation for Roofs, Walls & Floors

• Water Absorption
• <1% by volume (after immersion for 24 hours at 23C)

• Width
• 1.22 m

• Chemical Form
• Liquid (Single Component)

• Color
• White

• Density
• 0.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable (Water Based)

• Grade Standard
• Industrial, Construction Grade

• Length
• Custom/Applicable as per surface

• Material
• Acrylic Based Polymer

• Packaging Size
• 1 kg, 4 kg, 10 kg, 20 kg

• Purity
• High Purity Polymer Dispersion

• Thickness
• 1 mm (Recommended DFT for performance)

• Type
• Other, Elastomeric Waterproof Coating

• Usage & Applications
• Terrace, Roofs, Walls, Exterior Surfaces, Waterproofing applications, Horizontal/Vertical Surfaces

• Water Absorption
• Very Low, < 1%

• Width
• Applicable as per area coverage

• Chemical Form
• Powder and Liquid (Two-component system)

• Color
• Grey or White

• Density
• 2.00 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-Flammable

• Grade Standard
• Technical Grade

• Material
• Cementitious with polymer

• Packaging Size
• 20 kg set (Powder + Liquid)

• Thickness
• Approx. 2 mm (recommended coating thickness)

• Type
• Other, Two Component, Ready to use polymer-modified cementitious waterproofing coating

• Usage & Applications
• Waterproofing of water tanks, basements, bathrooms, terraces, balconies, concrete structures, and masonry surfaces

• Water Absorption
• Very low water absorption, provides excellent waterproofing

• Chemical Form
• Two Component Liquid

• Color
• Light Grey

• Density
• 1.45 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable (Solvent Free)

• Grade Standard
• Industrial, IS Standards

• Material
• Solvent Free Epoxy

• Packaging Size
• 4 Litre and 16 Litre packs

• Purity
• Industrial Grade

• Thickness
• 200-300 microns (per coat)

• Type
• Other, Epoxy Based Protective Coating

• Usage & Applications
• Protection of concrete and steel structures, chemical resistant lining for tanks and secondary containment areas, waterproofing of potable water tanks

• Water Absorption
• <0.1% (24 hours)

• Chemical Form
• Liquid Polyurethane

• Color
• Grey

• Density
• 0.05 Gram per cubic centimeter(g/cm3)

• Flash Point
• >60C

• Grade Standard
• Construction Grade

• Material
• Polyurethane

• Packaging Size
• 20 kg pail

• Purity
• Approximately 100% reactive solids by volume

• Thickness
• 1.4 mm (recommended system thickness)

• Type
• Other, Single-component, cold-applied, liquid membrane

• Usage & Applications
• Roof waterproofing, terraces, balconies, walkways, podiums, and wet areas

• Water Absorption
• <1% (24 hrs)

• Chemical Form
• Liquid Polymer Emulsion

• Color
• Milky White Liquid

• Density
• 1.02 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Construction Grade

• Length
• N/A (Liquid Product)

• Material
• Styrene Butadiene Rubber (SBR) Polymer Emulsion

• Packaging Size
• 1 Litre, 5 Litres, 20 Litres

• Purity
• High Purity Polymer Emulsion

• Thickness
• N/A (Liquid Product)

• Type
• Other, SBR Latex Bonding Agent

• Usage & Applications
• Bonding agent for concrete repair, cementitious toppings, floor screeds, waterproof coatings and patching mortars

• Water Absorption
• Improved resistance over unmodified mixes

• Width
• N/A (Liquid Product)

• Chemical Form
• Liquid

• Color
• Grey

• Density
• 1.25 Gram per cubic centimeter(g/cm3)

• Flash Point
• >200C

• Grade Standard
• Industrial Grade

• Length
• As required

• Material
• Polyurethane

• Packaging Size
• 20 kg / 25 kg / 50 kg

• Purity
• 99%

• Thickness
• 1.5 mm to 2 mm

• Type
• Other, PU Waterproofing Coating

• Usage & Applications
• Industrial waterproofing of roofs, basements, tanks, terraces, and water retaining structures

• Water Absorption
• < 0.1%

• Width
• As required

• Chemical Form
• Two-component - powder and liquid

• Color
• Grey/White

• Density
• 1.8 Gram per cubic centimeter(g/cm3)

• Flash Point
• Non-flammable

• Grade Standard
• Industrial/Construction Grade

• Length
• Custom/As Required

• Material
• Cementitious Polymer Modified

• Packaging Size
• 20 kg set (15 kg powder + 5 kg liquid)

• Purity
• High purity (industrial grade)

• Thickness
• Min. 1 mm per coat (recommended)

• Type
• Other, Waterproofing Chemical Coating

• Usage & Applications
• Internal and external waterproofing of concrete and masonry substrates, swimming pools, basements, water tanks, terraces, retaining walls

• Water Absorption
• <1%

• Width
• Custom/As Required

• Chemical Form
• Liquid

• Color
• Gray

• Density
• 1.3 Gram per cubic centimeter(g/cm3)

• Flash Point
• >23C

• Grade Standard
• Industrial grade

• Length
• N/A (Liquid applied)

• Material
• Polyurethane (PU)

• Packaging Size
• 20 kg pail

• Purity
• High purity industrial grade

• Thickness
• 1 mm (typical recommended DFT)

• Type
• Other, Single component, liquid-applied polyurethane waterproofing membrane

• Usage & Applications
• Waterproofing roofs, terraces, balconies, podiums, bathrooms, wet areas, and other concrete surfaces

• Water Absorption
• <1% (after 24 hours)

• Width
• N/A (Liquid applied)

• Chemical Form
• Single Component Acrylic Polymer

• Color
• Milky White Liquid

• Density
• 1.04 Gram per cubic centimeter(g/cm3)

• Flash Point
• Not Applicable (Water based)

• Grade Standard
• Industrial Grade

• Material
• Acrylic Polymer Dispersion

• Packaging Size
• 1 Litre, 5 Litre, 10 Litre, 20 Litre containers

• Purity
• High Purity Acrylic Dispersion

• Type
• Other, Liquid Waterproofing Compound

• Usage & Applications
• Designed for cementitious waterproofing of bathrooms, terraces, balconies, water tanks, and roof slabs; also used as a protective coating for concrete and masonry surfaces

• Water Absorption
• Reduces water absorption when mixed with cement